I replaced the disc calipers on my 1980 Spit with rebuilt ones at the
same time I replaced the braided hose connectors all around (but not
the brake lines themselves). I now get pulling to the right. I have
done the pressure bleeding process twice. I am wondering if there is
any scenario with air in the line that would cause one side to stick
but not the other.
Thanks for advice.
Tim Gaines
Clinton, SC
1980 Spitfire
1974 TR6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|