Randall answered:
> > However, when you are installing an new master cylinder
> > bench bleeding is the only way to get all the air out of it.
> Well, just to present the opposing viewpoint, I have never
> bench bled, and it's never caused me any problems.
When I replaced all the brake lines in the Spitfire I sure didn't bench-bleed
them! Fluif would have drippppped all over the place as I put the lines in.
Had no trouble bleeding them in situ. Have had no brake trouble since then.
---
Jim Muller
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|