YES
----- Original Message -----
From: "dorpaul" <dorpaul@bellsouth.net>
To: "list Triumph" <triumphs@autox.team.net>
Sent: Tuesday, October 14, 2008 9:30 AM
Subject: [TR] jet adjustment
> Yesterday when I had my TR3's engine running, I tried but couldn't get to
> the
> needle level adjustments on the SU's to balance the H6's. I wonder if I
> should have tried harder.
>
> However, I removed both air filters and saw that both pistons were 3/4's
> of
> the way down and opened in sync. when the rpmmmm's were increased. I had
> already ball-parked their fast (or is it their slow) idle adjustment.
> Does
> this sync. suggest that they were needle-height-ok-adjusted?
>
> After running it at various low rpmmm's I shut it off with the KEY SWITCH!
> I
> removed all the plugs and they all looked equally flat sooty straight
> black.
> Does this mean turns of the jet adjustments equally up or is it down?
>
> Thanks,
> Paul Dorsey
>
>
> BTW- One plug was a Champion L182Y. Any difference?
>
> --
> I am using the free version of SPAMfighter for Personal use.
> SPAMfighter has removed 947 of my spam emails to date.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
>
> The Trial and Professional version does not have this message in the email
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as wensley_tr@comcast.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|