What's frustrating is that only the little rubber diaphragm fails, not
the rest of the valve. Just buzzing out a small pop rivet allows one to
change the piece, without risking breaking the pipe trying the unscrew
it from the head. Unfortunately I have never seen anybody selling just
the rubber part.
Mark Hooper
1972 TR6 (on third valve)
-----Original Message-----
From: triumphs-bounces+mhooper=digiscreen.ca@autox.team.net
[mailto:triumphs-bounces+mhooper=digiscreen.ca@autox.team.net] On Behalf
Of Mark Steph
Sent: October 7, 2008 12:08 AM
To: John & Pat Donnelly
Cc: triumphs@autox.team.net
Subject: Re: [TR] Piece of Crap H2O Heater Valve
I don't mean to rub it in or anything... but I am still running on the
original. :)
John & Pat Donnelly wrote:
> The water heater valve on the TR4-TR6 sucks. I've replaced three so
far in
> the last 15 years.
>
>
>
http://SporkInTheEye.blogspot.com
--
It's true that love can change us
But never quite enough
Sometimes we are too tender
Sometimes we're too tough
If we get too much attention
It gets hard to overrule
So often fragile power turns
To scorn and ridicule
Sometimes our big splashes
Are just ripples in the pool
Feelings run high
Neil Peart, "Emotion Detector", Power Windows (1985)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|