> So I slathered the original axle in grease slid it
> together - this was tough due to the inability for the air to
> be displaced -
It's my belief that there is supposed to be a 'breather' hole in there
somewhere. Perhaps it's clogged with dirt and old grease ? Otherwise, the
movement of the splines will try to force air through the splines, which
could eventually dry out the grease.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|