> I have acquired another block from a club member ( Ser # CT25743E)
> which I think is from a TR4 or TR4A.
Should be a 63 TR4, I believe.
> Can anybody tell me what
> won't work and what I will have to acquire?
AFAIK, the block castings are identical. You'll need to swap the front
plate from your old engine; and of course keep the main caps from the new
engine but I believe everything else should interchange.
Don't forget to look at things like cam bearings, and the bushing that
carries the oil pump drive shaft.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|