Gary
Compression tests are always done on a none running engine as in the
engine is not capable of starting. (ignition disabled)
If you haven'y already, install the starter (and solenoid) and hook
it up to a battery. Assuming you have a solenoid with a manual push
button you can easily turn the engine over with that. Take out the
plugs to reduce the load on the rod bearings. Run your tests dry and
then and squirt some oil into the cylinders and do it again. Any
significant difference between the two tests indicates a problem with
the rings.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|