Hello,
I'm having an engine rebuild on my 1967 TR4A and am considering upgrading the
pistons to either 87mm or 89mm. The car is strictly for street driving. I'd
like to get more power out of the engine but fear 89mm may be too much. Still,
89mm is only 3mm bigger than the stock 86mm pistons. Any thoughts on which
direction I should go? 87mm or 89mm?
Thank you,
Pat
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|