While still trying to get my TR2 engine to run smoothly, I noticed
this- it seems the engine is running on 3 cylinders due to the rough
idle, I discovered if I pull the plug cap off No2 plug while running
there is no change in the rough idle, however when I bring the cap
near the plug but not actually pushed into place the engine picks up
and runs smoothly, and when I push the cap fully home the rough idle
returns. Any ideas?
John
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|