At 01:41 PM 8/27/2008, you wrote:
> > Maybe a tool like this?
> > <http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=36554>
>
>Certainly not that one. It's pins are round, and much too large.
OK, I had a mental picture of the switch, but I've not seen one
lately, nor have I held that tool in my hand.
>In fact, I would say that any 'adjustable' tool is going to work poorly. It
>takes thin, rectangular blades to engage the ring, and they need to be at
>both the correct distance and angle to fit securely.
I've got some hobby tool catalogs here at the house... Something
like this might do it:
<http://www.contenti.com/products/watch-tools/159-915.html>
Or just file down some pliers... <g>
Cheers,
Jeff
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|