I was thinking that the very early TRs had a zerk on the hub cap and
were to be filled with grease.
Certainly Paul's, mine & most others would only have that screw hole.
I back up the hole with a nut JBWelded inside the cap to grip the pull
screw a better bite. I use a 2" screw eye with the correct threads
and run it in until it contacts the stub axle, then a couple more
twists (fingers, no wrench) brings the cap off.
Geo
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|