triumphs
[Top] [All Lists]

[TR] Nyloc Nut on Tie-Rod Ends

To: triumphs@autox.team.net
Subject: [TR] Nyloc Nut on Tie-Rod Ends
From: GHaynesTR4@aol.com
Date: Sun, 24 Aug 2008 14:29:36 EDT
List,
I had a frightening experience last nite: steering failure on my GT6.   The 
Nyloc nut came off the left tie-rod end and the end popped out of its tapered 
hole in the steering arm - fortunately, it happened right in my garage!   I 
replaced the (missing) Nyloc nut with a Grade 8 nut and lock washer, then 
double-checked the tightness of the Nyloc on the right side.   The threads 
stripped 
right out!   
Although the nut has the gold color of Grade 8 hardware, it has no markings 
and is the height of a jam nut (about six threads) plus the Nylon locking 
feature.   I have lost my confidence in Nyloc nuts in such critical 
applications.   
Sadly, just about all tie-rod ends seem to use Nylocs instead of the 
old-fashioned (and reliable) castellated nut and cotter pin.
Let this be a "Heads Up" to anyone who is using Nylock nuts in their tie-rod 
ends.   It might have happened on the road rather than in the garage!
George Haynes


**************
It's only a deal if it's where you want to go. 
Find your travel deal here.
      
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>