triumphs
[Top] [All Lists]

[TR] [Spits] Pertronix Failure

To: <jimmuller@rcn.com>, <Triumphs@autox.team.net>
Subject: [TR] [Spits] Pertronix Failure
From: Bob Berger <bberger720@sbcglobal.net>
Date: Tue, 19 Aug 2008 05:57:03 -0500
Jim & all,

It is an original original OPUS module mounted on the side of the
distributor.  I installed the distributor in the mid 90's when my 2nd
petronix unit died.  One of the places in town that works on MG's & Triumphs
had it in a box and didn't know if it would work, he told me to bring him $5
if it worked. I took him the $5 the next week.  It has finally died.

-- 
Bob Berger
78 Spitfire
St. Louis, MO



> From: Jim Muller <jimmuller@rcn.com>
> Organization: Southern Rail
> Reply-To: <jimmuller@rcn.com>
> Date: Mon, 18 Aug 2008 22:08:56 -0400
> To: <Triumphs@autox.team.net>
> Subject: Re: [TR] [Spits]  Pertronix Failure
> 
> On 18 Aug 2008 at 20:26, Bob Berger wrote:
> 
>> Can points be retrofitted to an electronic ignition? My 78 spitfire has the
>> original Lucas electronic unit that is mounted on the side of the
>> distributor.
> 
> Is that the original original, or the CEI Kit which (so I understand)
> was a replacement for the original?  The CEI control box has a GM
> module inside.
> 
> -- 
> Jim Muller
> jimmuller@rcn.com
> '80 Spitfire, '70 GT6+
> _______________________________________________
> 
> Support Team.Net  http://www.team.net/donate.html
> 
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
> 
> 
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
> 
> You are subscribed as bberger720@sbcglobal.net
> 
> http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [TR] [Spits] Pertronix Failure, Bob Berger <=