Randall,
Just curious but if flipping the blade over has no impact, why does Hayden
have you flip the blade and swap the wires around to turn a pusher into a
puller? I know that swapping the wires changes the rotation of the fan motor
but there must also be something in the fan blade construction that makes it
more effective? I learned the "hard" way when I went to change the fan from
puller to pusher and just flipped the blades over as the direction said to
do. The part about changing the wiring around was in a completely different
section of the instructions. As you said, just flipping the blades had no
impact of pusher vs. puller.
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net] On
Behalf Of Randall
Sent: Thursday, August 07, 2008 11:14 AM
To: 'Peter C'; triumphs@autox.team.net
Subject: Re: [TR] re TR4 help, cooling fan, conclusion
> Makes me look stupid. Anyway, turning the blade over has gotten the
> airflow in the right direction.
Don't mean to add insult to injury, Peter, but turning the blade over would
make no difference at all to airflow direction; just like a nut turns the
same way no matter which side goes on the bolt first.
Randall
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as 75tr6@tr6.danielsonfamily.org
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.156 / Virus Database: 270.5.12/1597 - Release Date: 8/7/2008
5:54 AM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|