Thanks, but on a 3 it's a "screw in" clevis pin, called a "screw pin" by
Moss.. but is unobtainable in the U.S. Maybe I got the last two at
Stoneleigh -- may have to make another trip for another set ;^)
Tom
----- Original Message -----
From: "Steven Newell" <steven@newellboys.net>
To: "THOMAS FANSHER" <tfansher@comcast.net>
Sent: Tuesday, July 29, 2008 8:57 PM
Subject: Re: [TR] TR3 clevis pin
> THOMAS FANSHER wrote:
>
>>Anyone have a source for two new or used clevis pins that attach the
>>master cylinder push rods to the pedals? The usual sources don't have
>>them. I know I had new ones for "my TR3" but haven't sourced them for the
>>"new car".
>>TIA
>>
> I found matching sized clevis pins at my local ACE hardware after striking
> out at Home Depot.
>
> Steven
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|