> first-upper and lower grill molding for small mouth tr3 grill
Those have been like hen's teeth for many years. If you do find a source,
please let us know.
> and second their is a bracket that attaches to the center of the front
> apron and back to the center on the round tube on the frame to tie the
> apron in place and ,I think,keep it from vibrating.
Are you talking about the hand crank guide? Small round hole in the "shelf"
behind the grille, with a larger rectangular hole behind it; then two tabs
on the round tube with holes in them? The guide casting is Moss 802-885,
the rods are 802-995; both are listed on their website. Also needs some
bolts & nuts, which are common hardware items (or possibly included with the
casting & rods).
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|