Ive been looking at a set of Harland Sharp roller rockers on eBay for my
TR6 with a 1 to 1.5 lift ratio that gives a fast road lift profile.
They apparently slide on with no modifications required. Has anyone had any
experience with these? Is installation really that simple? Is there really
an appreciable gain in power while retaining a smooth idle? If they are a
good deal, are there suppliers other than an eBay auction for these that you
would recommend?
Thanks so much in advance,
Brian Lanoway
1973 TR6
Winnipeg
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|