I think the switch you mention is designed to take the full load of the
battery and thus will need cables of comparable gauge to the battery cables
(can't recall if those are 4 gauge or 6 gauge). You may also want the cable
run to be as short as practical which likely has you mounting the switch on
the cockpit side of the firewall.
Geo
----- Original Message -----
From: "dorpaul" <dorpaul@bellsouth.net>
Subject: [TR] Kill Switch or a Cut-off Switch
> I've got a 'Kill Switch or a Cut-off Switch' that I won at a VTR
> conference
> auction. The back side of it simply is two lugs? (like 3/8" bolts &
> nuts).
> My guess is that this can be used in-line with the battery at the - or
> +side
> of the battery . I've thought about installing it several places for
> either
> quick disconnection or anti-theft reasons. Can I run any kind of cable or
> wire to it? How about a heavy 2-wire cable?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|