Hi Randall,
If you can send me a copy of the plans for the hub puller that you said that
could be made out of heavy pipe flanges, I would be very appreciative.
I assuming it work for the TR3 as well as other TRs.
Sincerely,
Ibsen
----- Original Message -----
From: Randall
Cc: triumphs@autox.team.net
Sent: Thursday, July 10, 2008 11:40 PM
Subject: Re: [TR] hub pullers
> I'm not
> sure if you knew that the hubs were produced at my local
> Career Tech Center by the students as a project, which made
> them pretty affordable
I've got your plans Tony, and a lathe, but haven't stumbled across a
suitable chunk of steel yet. Any suggestions on where to find one cheap ?
And for anyone who is interested, I have a copy of an article originally
written by Eugene Wellenstein (but apparently no longer on the web) about
how he made a hub puller from some heavy pipe flanges and other hardware
items, with only simple machining and no welding. PDF format, about 3/4
meg.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as flashtr3@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|