triumphs
[Top] [All Lists]

Re: [TR] Hot Body, filler

To: <healeys@autox.team.net>
Subject: Re: [TR] Hot Body, filler
From: Mark Steph <tr6@pobox.com>
Date: Mon, 07 Jul 2008 11:05:30 -0500
Ever so slightly off topic here but... has anyone tried lead?  I read a 
few articles many years ago about the lost art of lead as a body filler 
and it sounded as if it was somewhat superior to traditional bondo-type 
fillers.  (But it has its hazards with breathing fumes/dust).

I have never in my life done body work so I really have no practical 
experience here.  But as someone that has had many cars professionally 
done with bondo-type materials, the end result in Texas 100 degree heat 
never lasted more than about 2 years.  After that the bondo cracks into 
a million pieces and ruins the paint job.  ...but maybe I just never 
picked the "right" body shop for my work.

-Mark
-- 

http://SporkInTheEye.blogspot.com
--
You can drive those wheels
To the end of the road
You will still find the past right behind you
Try to deny
The weight of the load
Try to put the sins of the past night behind you
         Neil Peart, "Carve Away the Stone", Test For Echo (1996)



Brian.L.Jones@gsk.com wrote:
> I thought for a second that Hot Body Filler was a post sent mistakenly to 
> the Triumph List.
> 
> It seems not, LOL.
> 
> Two thoughts Dave:
> 
> 1) There will be a range of acceptable paste:hardener proportions. Head 
> for the lower amounts of hardener and you'll have more working time. Make 
> sure you mix well.
> 
> 2) Don't spend time cleaning the mixing board and spatula. Find disposable 
> alternatives. I've used plastic document sleeves before, and plastic 
> packaging. Find a disposable spatula. Lolly Ice sticks seem workable. I've 
> used scrap wood trim before. Then you'll only have the spreader to clean. 
> The more flexible your spreader, the easier it is to break off the 
> hardener. Use two spreaders. Let one harden while you spread with the 
> other. Then bend spreader to flex off the hard filler.
> 
> Brian
> 
> Subject: Re: [TR] hot body filler
> To: <DLylis@aol.com>, <FGFO1@aol.com>, <triumphs@autox.team.net>
> 
> I have never had any problem with the finished product when reducing the
> amount of catylist to reduce hardening time.  Down here in Southern AZ, 
> you
> have todo what you can to adapt to the torrid heat.
> 
> Joe.
>  ----------
>   To: spitlist@cox.net ; FGFO1@aol.com ; triumphs@autox.team.net
>   Subject: Re: [TR] hot body filler
> 
>     Joe
> 
>   This is not something I have chosen to experiment with, but all sources 
> I
> can find highly discourage this.  The hardness, adhesion, durability of 
> the
> filler is dependent upon it being mixed in proper proportions.
> 
>   David Lylis
> _______________________________________________
> 
> Support Team.Net  http://www.team.net/donate.html
> 
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
> 
> 
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
> 
> You are subscribed as tr6@pobox.com
> 
> http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>