> I have a green/purple wire that comes down the stator tube
> that provides the ground for the horns.
Are you sure it's the right wire? Should be brown/black; and also
noticeably heavier gauge wire than the turn signal connections.
> How does this green/purple wire connect
> to the brown/green, brown/black, if there is no relay.
The wire from the control head connects to the brown/black to both horns;
and grounds it when the button is pushed. Thus both horns see 12v across
their terminals only when the button is pushed.
HTH
Randall
[demime 1.01d removed an attachment of type image/gif which had a name of
TR3A-B schematic Dan Masters reduced.gif]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|