Gary,
The easiest way is to NOT remove them but to install Art Lipp's Delrin
bushings (http://www.trparts.com/newitems/column.html) right over them. You
can buy just the bushings from him for $25 or he'll rebuild your whole
column for $80. I went the bushing route on my TR6 over the winter. You can
see the process here http://tr6.danielsonfamily.org/SteeringColumn.htm
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net] On
Behalf Of goh56agan@comcast.net
Sent: Tuesday, June 17, 2008 5:21 PM
To: triumphs@autox.team.net
Subject: [TR] steering column inner bushings
List,
Any advice on how to remove and replace the inner bushings on a TR4 steering
column? I've tried tapping them out with a dowel but I,m not making much
progress. Do the replacements go in any easier? Thanks.
Gary O
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as 75tr6@tr6.danielsonfamily.org
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.93 / Virus Database: 270.3.0/1505 - Release Date: 6/16/2008
7:20 AM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|