Tom,
In my experience I've found that the floor mats for the TR3 are made a little
wider so that they lay up the vertical slightly to cover the seat well under
the doors. I used the floor carpet snap rings to keep them in position.
FWIW
Bob Stahlbush
60 TR3
66MGB
76 Midget
83 XJ6
70 BSA T-bolt
70 BSA lightning
---- tom white <tswhitez123@hotmail.com> wrote:
> I bought an interior kit from TRF many, many years ago. I had it installed
by
> someone else also years ago. When I installed my carpets last Sept. I
noticed
> that on the vertical pieces between the wheel arches and the door post
there
> is about an inch and a half of exposed body structure at the bottom. Were
> these installed wrong? Did I get the wrong kit?
>
> Thanks.
>
> Best regards,
> Tom
>
>
>
> _________________________________________________________________
> Instantly invite friends from Facebook and other social networks to join
you
> on Windows Live Messenger.
> https://www.invite2messenger.net/im/?source=TXT_EML_WLH_InviteFriends
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tr3bob@cox.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|