If you go to your LFAPS ask for their catalogue of fuel filters. There are
many in there that have threaded fittings for connectors. There are standard
thread and metric thread types. You can also look at Summitracing.com. One
caveat about summit is that many of their photos do not represent the actual
product.
It may take a while but you can probably find a filter that will connect
inline with your fuel lines.
Best regards,
Tom
> From: jercurry@comcast.net
> To: triumphs@autox.team.net
> Date: Wed, 28 May 2008 23:53:35 -0600
> Subject: [TR] TR3 inline fuel filter
>
> Howdy all,
>
> I am getting ready to finalize all of my fuel lines and ran across this
> question. I have heard that it is a good idea to install a modern fuel
> filter, but where should it be installed. All of hte fuel lines are metal
> from the tank to the carbs and all of the fuel filters I have ever seen
> connect via a rubber hose.
>
> thanks in advance.
>
> Jeremiah
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tswhitez123@hotmail.com
>
> http://www.team.net/archive
_________________________________________________________________
E-mail for the greater good. Join the im Initiative from Microsoft.
http://im.live.com/Messenger/IM/Join/Default.aspx?source=EML_WL_ GreaterGood
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|