--===============1237107422==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
Content-Language: en-us
Frank;
Why don't you just buy the correct item from Mark Macy? They're not that
expensive.
Joe
-----Original Message-----
From: triumphs-bounces+trglory=comcast.net@autox.team.net
[mailto:triumphs-bounces+trglory=comcast.net@autox.team.net] On Behalf Of
Frank - Sandy Crowe
Sent: Monday, May 26, 2008 1:07 PM
To: triumphs@autox.team.net
Subject: [TR] Length of Stator Tube?
OK, I can't find the info anywhere in my collection. What is the length of
the 3/8" OD brake line used to make a stator tube on a TR3a ('59, TS55223L)
with two-piece steering shaft? And what are the dimensions of the slot cut
in
the end of the tube that engage into the turn signal assembly? All info on
making one would be helpful.
Mine has been missing since I got the car ten years ago, and now that I have
the front apron off to replace the radiator, I decided to get the turn
signals
back where they belong (as opposed to the current method, a switch on the
dash
board.)
Thanks much
Frank
_______________________________________________
--===============1237107422==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
--===============1237107422==--
|