Hi,
I have been trying to get my wife's TR250 running. After I decided it wasn't
getting fuel, I noticed the fuel filter was collapsed. I got to looking
around and discovered a rubber hose in the gas line right below the fuel
tank.
This rubber hose has two 90 degree bends - very sharp bends. I quickly
decided this was the problem. When I straightened the bends out gas started
flowing out of the gas line near the engine where I has removed the fuel
filter.
So obviously, I need to replace that rubber hose. My questions are:
What size would the hose be? 5/16?
Should it really have bends in it? The catalog makes it look straight.
Thanks,
Roger Elliott
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|