On the Spitfire implementation of the KNs, I used stock Spitfire 1500 wheel
nuts. They are chrome and fit the taper just fine.
If you are talking about the larteg Triumphs, the studs are larger but I
would imagine that the stock lugnuts for that model would also work. I
think KN makes their wheels to use the stock lugnuts.
Joe C.
----- Original Message -----
From: "John Dunham" <john.dunham@amphenol-tcs.com>
To: <triumphs@autox.team.net>
Sent: Friday, May 16, 2008 6:11 AM
Subject: [TR] KN Wheel Lugnuts
> Anybody out there know of a good US based source for lugnuts for KN
wheels?
> I have tried all the locals with no luck. I was able to find some 7/16 -
> 20 lugnuts that looked like they should fit but the lugnut did not fit
into
> the hole in the rim.
> I could be missing something, & if anybody can help, I would appreciate
it.
> Thanks,
> John D
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as spitlist@cox.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|