--===============2100515115==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
Content-Language: en-us
Bob;
I just finished my TR6 (she's ready for the Carlisle show next week) and did
it the exact same way as you. I was going to inquire about the trouble I'm
having with the left rear corner of the hood being higher than the fender,
but I see that you have the same problem too. I have the rubber cone
adjusted down as far as it will go but it's still not enough. BTW, while I
was putting the car back together, I installed Art Lipp's throttle shaft
bushings and I have to tell you that it went together as slick as a skid
mark! What a great design; thanks Art.
Joe
-----Original Message-----
From: 6pack-bounces+trglory=comcast.net@autox.team.net
[mailto:6pack-bounces+trglory=comcast.net@autox.team.net] On Behalf Of Bob
Danielson
Sent: Wednesday, May 07, 2008 1:21 PM
To: 'Chuck Arnold'; 'Friends'; 'Triumph'
Subject: Re: [6pack] Replacing TR6 hood
Chuck,
I just went through this and it wasn't too bad. Here's how I did it
http://tr6.danielsonfamily.org/HoodInstall.htm
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.9/1418 - Release Date: 5/6/2008
5:17 PM
--===============2100515115==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
--===============2100515115==--
|