> A Manco gauge is a very low tech way of measuring toe-in, by
> showing the difference in width between the rear of the front
> tires and the front of the front tires. It will not show
> whether the wheels are tracking straight ahead.
Or whether the tires are exactly the same width at all points; which mine
almost always are not. Also affected by wheel or tire runout.
You can do a better job of checking toe-in with some wood scraps and a
pocket knife (which is what I use).
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|