what is a Manco guage?
Best regards,
Tom
> Date: Sun, 27 Apr 2008 21:01:32 -0400
> From: jmitch@snet.net
> To: 6pack@autox.team.net; triumphs@autox.team.net
> Subject: [TR] Alignment specs
>
> Actually I should have said I have excessive toe-out. I measure about 5
degree toe out on my Manco gauge. JM
>
>
> I need to take the TR6 in for alignment as it appears I have
> excessive toe in. The right front wheel seems to be scrubbing the
> pavement on full left turns. I have 205-70-15" tires on wire wheels and
> also have installed Goodparts rear trailing arm adjusters. What specs
> should I ask for for front toe-in and rear camber angle. The numbers in
> Bentley are for the car with 2 passengers on board and it won't be that
> way when it gets aligned. Any advice would be appreciated. John
> Mitchell 76 TR6
> _______________________________________________
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tswhitez123@hotmail.com
>
> http://www.team.net/archive
_________________________________________________________________
Make i'm yours. Create a custom banner to support your cause.
http://im.live.com/Messenger/IM/Contribute/Default.aspx?source=TXT_TAGHM_MSN_
Make_IM_Yours
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|