The one I replaced was a ball cock type & replaced it with what I
believe is also a ball cock, quarter turn on off. Got it from Moss.
John
On 24 Apr, 2008, at 6:35 PM, Angelo Graham wrote:
> Good day listers:
> Has anyone used one of the newer ball-valve petcocks for the drain
> petcock in the side of the TR2/4 block? Wondering if a ball-valve can
> be sourced for this application? The threads look like 1/2" std. pipe
> threads, but I gather that the valve body has to seal against the
> block with a gasket or "O" ring. Haven't found anything that might
> work.
> The original petcock on my block has pretty well had it with the
> spring corroding to nothingness. Thought that a ball valve might be a
> good substitution.
> Thanks in advance for any advice.
>
> Angelo Graham
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as 60tr3a@cox.net
>
> http://www.team.net/archive
John A. Wise
Glendale, AZ
1960 Triumph TR3A
Commission No: TS80422L
http://members.cox.net/60tr3a/
http://www.triumphowners.com/876
1977 Porsche 911S
http://members.cox.net/porsche911s/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|