On Tuesday 22 April 2008 05:24 pm, Geo & Kathleen Hahn wrote:
> That 7" piece sounds like the short bit that connects the rubber line to
> the fuel pump inlet.
>
> As for the 1/4" line and your "I'll stick with my rubber tubing" -- From
> the fuel pump to the carbs was originally a 1/4" hard line (not rubber) and
> I think this is a good thing to keep.
>
> Maybe you don't need stainless for that run but I don't care for the look
> and question the safety of snaking a long run of rubber fuel line around
> the engine.
>
> Geo
The 1/4 " hard line from pump to carbs is available from Moss. Part # 376-220.
You have to bend the pipe to the original shape but it is that softer steel.
Price about 32 bucks.
Or you can go buy some bulk soft pipe and bend it yourself.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|