Thanks Dave,
Fred Thomas advised to back the wire out of the spark plug cap so there is
about 1/2" of gap in the plug cap to allow for the spark to jump. I have them
all the way in. In addition he said the wires are now silicone, not good. I
think I will change the wires out and keep the bumble bee wire for shows. It
appears that this is a common problem with TR3's.
Alex
----- Original Message -----
From: DLylis@aol.com
To: ambritts@bellsouth.net ; sumton@sbcglobal.net
Cc: triumphs@autox.team.net
Sent: Wednesday, April 16, 2008 7:04 AM
Subject: Re: [TR] Sputtering 59 TR3A
Alex,
I use bumble bees on my 60 as I like the "vintage look" however the
connection between the plug cap and the wire is funky at best. I had an old
set of wires from my 6 and pulled off the rubber end caps and put them on so
the wire and the cap are more positively connected. Problem gone.
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
-----------------------------------------------------------------------------
-
It's Tax Time! Get tips, forms and advice on AOL Money & Finance.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|