The grab bar is mounted with 4 ea. sheet metal screws moss# 314-190 or 323-555
depending what commission # you have. The sheet metal screws are held in place
by the 4 ea. metal clips mounted under the dash rail bracket. I don't see a
part# available any more.
If yours are missing then you can probably match them at the local hardware
store or call Moss#.
Ibsen
----- Original Message -----
From: Eric Bartleson
To: triumphs@autox.team.net
Sent: Tuesday, April 08, 2008 11:31 AM
Subject: [TR] TR3 Grab Bar & Alloy Wheels
I cannot figure out how to install the "grab bar" on the passenger
side of my TR3A. This is about the last thing I need to accomplish in
the rebuilding and renovating of my TR.
I also saw a TR3 on ebay with the greatest looking alloy wheels
with a Triumph emblem in the center. Does anyone have any experience
with alloy wheels, and do you know where to order a set with a Triumph
emblem?
Eric Bartleson
1959 TR3A almost ready to drive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as flashtr3@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|