-----Original Message-----
From: dorpaul <dorpaul@bellsouth.net>
I now notice there is a difference in the two front flasher bulb
holders from the two rear flasher bulb holders. From the side, it can
be seen, that one type is longer than the other. Trouble is, I DON'T
KNOW IF THE LONGER ONE GOES UP FRONT OR IN THE REAR? The aftermarket
vendor I bought them from didn't say. Can you help me?
Also, Moss show they use different bulbs, however, both flashers show
they take dual-filament bulbs. However, I've already found out that a
single filament bulb will work in a dual filament bulb holder. It
will twist-in and stay down too. I've already bought the wrong kind of
bulb for it!!
==AM==
Paul, both front and rear flasher lamp assemblies should APPEAR to be
the same. I say APPEAR because both are (or should be) Lucas L594
units. The only difference is that the front ones take dual-filament
bulbs since they act as both "side" and "flasher" lamps, while the rear
ones originally were single-filament since they were only "flasher"
lamps.
--Andy Mace
*Mrs Irrelevant: Oh, is it a jet?
*Man: Well, no ... It's not so much of a jet, it's more your, er,
Triumph Herald engine with wings.
-- Cut-price Airlines Sketch, Monty Python's Flying Circus (22)
Check out the North American Triumph Sports 6 (Vitesse 6) and Triumph
Herald Database at its new URL: <http://triumph-herald.us>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|