Sounds like the perfect time to add the aftermarket luggage rack that
requires you to press out those pins anyway. Really a slick set-up that I
find very useful for roadtrips.
BTW: I use a cap screw & nyloc nut in place of the pin when the rack is not
mounted.
Geo
----- Original Message -----
From: "Adrian Jones" <adrianjones747@earthlink.net>
To: <triumphs@autox.team.net>
Sent: Thursday, April 03, 2008 5:42 PM
Subject: [TR] TR3A Hood/Trunk hinges
> Hi folks,
>
> Well, I just back home from work and guess what. The pin from one of the
> boot hinges had apparently fell out - leaving the trunk lid supported by
> only one hinge. The pin in the other hinge is OK - flush with the hinge,
> but the pins in the hood hinges look like they may also go AWOL, both
> sticking out about 1/16 inch. Has anybody experienced this?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|