If the timing is not correct the valves will interfere with the pistons.B So
basically if you've slipped a tooth or two you've likely smacked the piston(s)
against one or more valves.
Brad
-----Original Message-----
From: <hdrider570@peoplepc.com>
Sent 3/20/2008 1:28:19 PM
To: "Triumph Mailing List" <Triumphs@Autox.team.net>
Subject: [TR] TR7 QuestionDoes anyone know if a slipped timing chain on a TR7
will bend the valves? or is there enough clearance for the motor to spin
freely
without hitting anything.
Edward Hamer
Petaluma CA
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|