In a message dated 3/14/2008 11:53:09 AM Central Daylight Time,
tr3driver@ca.rr.com writes:
> No, the TR4 vertical links were the same as TR2-3. When the caster was
> added, the link itself did not change, only the location of it's upper end
> relative to the lower end. The A-arms, ball joint, trunnions, steering
> levers, etc. all changed to tilt the link, but the link itself did not
> change until the redesign with the TR4A.
>
So it doesn't hurt the trunions to crank them a couple degrees out of shape,
then. My TR6 wasn't happy at all with the trunion cranked 6 deg out.
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|