> I also assume that the 0 and 3 degree trunnions
> look different. If they do can someone tell me if there is a
> photo somewhere of the different types
Jim, I don't have a photo, but the 3 different trunnions (0 degree, 3 degree
left, 3 degree right) look virtually identical. To see the difference, you
must look closely at the angle between the pins that stick out, and the
threaded bore for the vertical link. With the 3 degree versions, you can
just barely see that the bore tilts a bit relative to the pins. If memory
serves, it tilts to the rear (of the car).
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|