I used classic tube, they come preformed and are a good quality. There was
some discussion on whether or not to get the stainless steel ones - much
harder and therefore harder to seat in the connectors, but mine are fine now
that I got a good set of tubing wrenches and really cranked down on them.
Tom
----- Original Message -----
From: "dorpaul" <dorpaul@bellsouth.net>
To: "list Triumph" <triumphs@autox.team.net>
Sent: Saturday, March 08, 2008 5:52 PM
Subject: [TR] set available, NA individual
> I am about to order a brake pipe set for my TR3A from Moss or TRF. Of
> course, it contains more than half-a-dozen individual 'lines' or 'pipes'.
> The
> entire set is available for about $124. However, many of the individual
> pieces are NA. Why is this? Any preference for venders?
>
> Thanks, Paul Dorsey 60 TR3
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|