I purchased a new wiring harness from Moss last year for my TR3,
and the main-beam bulb holder has been changed to a push-pull bulb holder.
I didn't have that bulb either, but I did have the old harness.
I cut out the new holder from new harness and soldered in the original
holder.
This aloud me to you use screw-in type bulbs.
Ibsen
TS35658LO
----- Original Message -----
From: Randall
To: 'list Triumph'
Sent: Monday, March 03, 2008 2:16 PM
Subject: Re: [TR] TR3's dimmer-indicator light
> What's a Man to do?
Take a look at your owner's manual, where you'll see that the high beam
warning light takes the same Lucas 987 bulb as the panel lights, ignition
and turn warning lights.
Of course that doesn't guarantee that someone hasn't substituted the wrong
bulb holder; in which case you're on your own.
Oddly enough I don't believe I've ever burned that bulb out ... how much
time do you drive with your high beams on ?
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as flashtr3@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|