I'd do the rear crankcase oil seal conversion before anything else.
Andrew Uprichard
-----Original Message-----
From: triumphs-bounces+auprichard=comcast.net@autox.team.net
[mailto:triumphs-bounces+auprichard=comcast.net@autox.team.net] On Behalf Of
Mo and Dave MacKay
Sent: Monday, February 25, 2008 7:01 PM
To: Mailing List Triumph (Triumph Mailing List)
Subject: [TR] Will I regret making these mods?
Hello:
I'm just about to start rebuilding the engine of my TR3A. I'd appreciate
some feedback from members of the list about 2 modifications I'm
considering.
1) In an effort to reduce the amount of oil that my car leaves behind, I am
considering adding a PCV valve assembly (as used in the TR4A).
For your reference, this is Moss USA part # 360-630
2) I was thinking of ceramic coating the exhaust manifold. Although this
might provide a modest benefit to performance, the primary appeal is
cosmetic.
I'd welcome any feedback.
Regards,
Dave MacKay
1960 TR3A s/n 68639L(O)
Near Toronto, Canada
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as auprichard@comcast.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|