If you take the wheels to a good powder coater they will sand blast them clean
before coating them. Good powder coating is a great wheel covering and it is
almost indestructible.
Best regards,
Tom
> Date: Tue, 19 Feb 2008 21:25:44 -0500
> From: triumph66@gmail.com
> To: Triumphs@autox.team.net
> CC: triumph.tr4a@gmail.com
> Subject: [TR] cleaning, prepping and painting steel TR3/4 wheels
>
> I picked up a set of TR3/4 steel wheels that are in good condition but have
> the requisite surface rust for 40 year old wheels.
>
> 1) What's the best way to go about bringing them back to life. Sand
> blasting, wire brushing (drill/wire brush) or another method?
>
> 2) Is it best to powder coat these wheels or just paint and clear coat
them?
>
> Any links to other sites and any advice is much appreciated,
>
> Ted
> State College, PA
>
> --
> T.L.L.
> 1966 TR4A CTC 73139 LO
> http://www.triumphowners.com/967
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tswhitez123@hotmail.com
>
> http://www.team.net/archive
_________________________________________________________________
Need to know the score, the latest news, or you need your Hotmail.-get your
"fix".
http://www.msnmobilefix.com/Default.aspx
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|