Robert Pete Groh, Ellicott City MD (KeyGuy) If you still need a used
switch, give me your mailing address. I will put one in the mail for
you with directions on how to pull the lock insert out of your present
switch.
I pick up used switch at the car show on the East Coast; pulling the
lock insert form the switch. If car owners who restore their cars, get
a car build record and find the switch or lock insert has been changed
i may have a used lock insert that matchs the number on the build
record.
On my wanted list, FS 955.
On early cars the key code letters/number were stamped on the face of
the switch. Around 1963- 1965, the cars used a FS, single side key.
Depending on what parts were still on the shelf, may have a lock insert
with the key number on face of the switch. If owners loose their key
for later models, I have a ring of pre-cut FS keys (75 number) 876-955
that I can send to owners, have to insert the key into the lock,
determine the correct key code number. At present you see car that use
the aftermarket Lucas key, with 5 numbers on same. The american key
blank that fits the lock is a Ilco LF 10 or LF 5.
Kind regards
On Wednesday 13 February 2008 05:01 pm, BearTranserv@aol.com wrote:
Anyone got an original TR4 ignition switch in decent condition? Mine
has been lost somewhere and I've got a PepBoys replacement in there
now.
Robert B. Houston
Texan in New Mexico 63 TR4
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|