--===============0407786189==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
I've heard horror stories about installing these nylon shaft bearings #19
(http://tinyurl.com/yvq8qf) so I was very pleased when they went in without
too much trouble. The problem now is getting the accelerator shaft back
through them as there isn't enough room in the driver's foot well to
accommodate the length of the shaft. Before I start tearing things apart,
does removing the interior carpeted panel free up room or do I have to
remove the bearing from the car, slide it over the shaft and work it back on
to the car once the shaft is in place?
Thanks
Bob
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org
Checked by AVG.
Version: 7.5.516 / Virus Database: 269.19.17/1252 - Release Date: 1/30/2008
8:51 PM
--===============0407786189==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
--===============0407786189==--
|