CarlSereda@aol.com wrote:
>Unadulterated U.S.TR4/4A, owners:
>For some reason on my TR4 I have 7 drilled holes in the rear trunk lid in the
>license plate area. I installed this used trunk lid around 1980 after a hit
>'n run left me with severe damage. Getting ready to weld at least 5 of these
>holes closed, and want to ensure I have the 2 remaining drilled holes in the
>right spot for my license and amco rack. Can you please tell me the height of
>your 2 bolts from bottom edge of trunk lid (center of bolt head to bottom edge
>of lid?
>
My TR4, still warm from the first top-down drive of the new year on a
balmy 45F day, measures 8 1/4" from the lower edge of the bootlid to the
center of the bolt head.
Steven
PS I saw a new MINI convertible enjoying the fresh air today; must be a
real British car after all.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|