Is there anyone within a reasonable drive from Boston who has a scrap high-port
head from a TR3 or 4 ? I want to create a torque/honing plate for prestressing
the liners prior to boring them out to 89mm. Doesn't matter if it's cracked or
otherwise unusable. Any help would be appreciated. Thanks!
Andrew Uprichard
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|