Well I ordered a new sender unit from Moss & when I tested fresh out
of the box I got 0 Ohms resistance no matter where I moved the float.
But given that the resistance device sits down in the gasoline I
thought I would try in in my 2/3s full tank. Still getting 0 Ohms.
Before I called Moss I wanted to test the gauge as well. So I thought
I would go down to the local Radio Shack & buy a couple of resistors
to check it out as well. Since the gauge is supposed to show full at
about 70 Ohms I thought I would try to get something close to 70 &
something around 35. Given I took my last physics class 40+ years ago
any advice would be very much appreciated.
John
John A. Wise
Glendale, AZ
1960 Triumph TR3A
Commission No: TS80422L
http://members.cox.net/60tr3a/
http://www.triumphowners.com/876
1977 Porsche 911S
http://members.cox.net/porsche911s/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|