Hello and Happy New Year to all!
When I removed the tub from the TR4 project, In addition to all the
electrical, steering, fuel, brake, clutch etc, I also removed the carbs.
And on re-fitting the tub to the completed frame, I removed the carbs as I had
installed them to test the engine etc. There just didnt seem to be enough
room with the carbs on.
I believe it took me < 1/2 hour to re-mount the completed tub on the frame.
To my surprise, everything lined right up and I had all the bolts in and tight
in another hour. And all by myself using only a couple of smalll pully -
blocks I got at HF to lower the tub.
Those pully - blocks (block and tackle) really helped alot as I could lower
inches at a time, align and lower etc. 1 on the front and one on the rear.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|