I am getting ready to install a new gear reduction starter in my '70 TR6 and
wanted to be sure I install it in the correct orientation. Does the solenoid
face up or down? On the original, it faces up, but on the upgrade, if it
faces up, this places the wire connections on the bottom (r/w to male
connector and 2 brown wires and positive battery wire to bolt and nut). TIA
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|